|
New Group Window Display
The detail contents of The Group Window Display are now expanded to
3/three screens, and you can now choose and select your preference.
“SRG/FEG/Bookmark List”
You may choose this screen to display the Node/Room stations
designated by “Group Settings” as previously.
“Connecting Node List” (New)
To display all the node stations currently connecting to the QSO Room you
are connecting now.
“My Room Access List”
(New, only when you are operating your Round QSO Room at your node)
To display all the node stations currently connecting to your QSO
Room.
* You are able to see all these list with your preference by QTH, ID#, Call
sign, etc. to sort ascending/descending in alphabetical order.
|
Popup Connect ID Window
(a) Additional “Refresh” function
(b) The node number and its Callsign currently in transmission will be displayed.
 |
Additional Display of the TOT Counter
Your remained available transmission time will be displayed (counting
down from three/3 minutes).
|
|
* You HRI-100 has a TOT function to stop your
transmission automatically in 3 minutes.
The display, therefore, shows you how many seconds you can still
transmit until your WiRES-II shuts off your transmission automatically.
|
Changes and additional functions of the Audio Settings function
(a)Sound Device
Selection (New. File Audio Settings)
Even when you have several Sound Devices (Drivers), you may able to choose
your most desirable one
.
(b) Change in the “Other” setting/configuration of the Voice in
Select function
Deleted to select from
MIC/LINE/Other. On/Off configuration for “Other”
Other = OFF : Audio only comes in from the device (driver) you selected with the Sound
Device selection (disregarding and overriding your original selection of
your Operating System).
Only MIC or LINE-IN can be selected as your “Voice In Select”.
Other = ON : Audio only comes from the device (driver) that you selected with the
Sound Device selection.
Both of your audio “In and Out” will not be controlled and
configured
(c) Changes in configuring
your audio related settings/parameters
When you are connected, you are not able to change/configure your
Voice In Select/Sound Device parameters. You will be required to restart your WiRES-II program. The details (of your new arrangement) will be recorded in your log.
(d) Deleted “Other = ON” display (at the right end corner of the display).
To be displayed as “Other (IN)”.
Initialization to the Default Function
(a)New
additional function to return back and to initialize to the default conditions.
(b)Reset
Function of your Wires-II activation with the WiRES-II Server
(You have now no need to configure to re-set up your program when
you change your registered information.)
Display of the Parameters of CW/Voice on the Property Sheet
|
|
|
For Windows Vista
(a) HELP File style
Changed the help file from Windows HELP[WiRES-IIhlp] to [WiRES-IIchm]
(b)Volume Control
For XP and other former OS : Adjusted by the Master Vol (SP
Level) and the WAVE vol (WAVE LEVEL) For Vista : The SP level only to be adjusted by the application. As the
master level to be adjusted by the OS, it is required to be adequately
adjusted.
|
|
|
<Other changes and revisions>
COM PORT : Now expanded up to 256.
Limitation of frequency input format
Currently limited up to 13000MHz -> Now up to
999999.99MHz (nine(9) digits with four (4) decimals
QSL pictures to be shown for the own node/Room at the Get Info
display
IN/OUT Announcement Updated for making proper announcement when configured ID
timing=”Wait”/ID and TX mode only=”Only not connected”.
Remote Operation
Updated for making proper behavior for the exit operation of the
remote function when the Personal Settings/Round QSO Room Setting displays are
on.
（Important
note for all Round QSO Room owners）
Please make your allowable stations that can check-in your QSO room
as minimum as necessary. You may need
more RAM memories, faster processor PCs, and/or faster broadband internet traffic
connection environment, etc.)
|
IMPOTANT NOTICE 
